Alcohol Sensor - MQ-D3

  • Alcohol Sensor
Mouse over image to zoom

MQ-D3 is an alcohol sensor which is mainly used for alcohol on leak detection, monitoring, alarm and intelligent gas leak alarm system.

  • Model Number: MQ-D3
Quantity:
- +

Product Specification

Alcohol Sensor MQ-D3

 

Specification:

MQ-D3 type semiconductor alcohol gas sensor is mainly used for alcohol on leak detection, monitoring, alarm and intelligent gas leak alarm system; Its use advanced flat production process, from the heater and micro- Al2O3 forming a metal oxide semiconductor material constituting the ceramic substrate , with the electrode wire leads, encapsulated in a metal tube housing, cap . When detecting the presence of gas, the gas concentration in air is higher, the higher the conductivity sensor; Using a simple circuit that can change the conductivity of the gas is converted to an output signal corresponding to the concentration.

 

Character:                                          

1. High sensitivity to Alcohol gas

2. Low power consumption                        

3. Fast response and resume

4. Good stability and long life                        

5. Simple drive circuit

6. Small size

 

Application:

1. Domestic gas leakage detector

2. Industrial gas detector

3. Portable gas detector

 

Technical Parameter:

Gas: Alcohol Gas
Detection range: 10 to 1000ppm

Characteristic gas: 100ppm Alcohol gas
Sensitivity: R in air / R in typical gas ≥ 5
Load Resistance: 1~50Ω adjustable
Response time: ≤ 30s
Recovery time: ≤ 60s
Heating current: <=80mA
Heating voltage: 5V
Measuring voltage: 5~50V
Operating Conditions Ambient temperature: -20~+55℃
                         Humidity: ≤ 95% RH
                         Environmental oxygen content: 21%
Storage conditions Temperature: -20~+70℃ 

                           Humidity: ≤ 70% RH

 

If you cannot find what you want, you can entrust OFweek to source for you. Just click:

Sourcing Service